ASTM D-1557 & 698 1 / 16 1) Compact Each layer with ……..Blows for Method C/6 inch diameter Mold A) d) 75 B) b) 25 C) c) 56 D) a) 30 2 / 16 2) In the ASTM D 1557 Number of Blow are ……., and Number of layers are…….. A) c) 25, 3 B) b)56, 3 C) a) 56, 5 D) d)None 3 / 16 3) Drop Height or the Free fall height of the hammer in the ASTM D 1557 is A) d)18±0.05 B) c)15±0.05 C) a) 12±0.05 D) b)10±0.05 4 / 16 4) There are……. Alternative methods for ASTM D 1557 and ASTM D 698 A) D) 4 B) B) 2 C) A) 1 D) C) 3 5 / 16 5) The Minimum test Specimen (test fraction) mass for Method A and B A) c)5.9 kg B) d)29kg C) b)16 kg D) a) 2.3 kg 6 / 16 6) For the Method C Diameter of the Mold should be A) a) 4 inch and 5 inch B) c) 6 inch only C) b) 6 inch and 4 inch D) d) 4 inch only 7 / 16 7) As per ASTM D1557 what does the peak of proctor Test Curve represents A) a) Maximum Dry densit B) b) Maximum wet densit and Optimum Moisture Content C) c) Optimum moisture D) d) Maximum Dry densit and Optimum moisture 8 / 16 8) The guide sleeve shall have at least……..vent holes at each end and the angle of theses Vent Holes are A) a) 4 and 90 degree B) d)None C) c)8 and 90 degrees D) b) 2 and 180 degrees 9 / 16 9) 12. The minimum Test Portion mass for the Single Test or Methods C A) b) 16 kg B) a) 2.3 kg C) c) 5.9 kg D) d)29 kg 10 / 16 10) Compact Each layer with…….Blows for Method A and B/4 inch diameter Mold A) b) 25 B) c)56 C) a) 30 D) d)75 11 / 16 11) Weight of Hammer in ASTM D1557 is ……. A) c)4.54 Kgs B) d)Both A and C C) b)5.5 lbf D) a) 10.0±0.02 12 / 16 12) The Minimum test Portion mass for the Single Test for Method A and B A) c) 5.9 kg B) d) 29 kg C) b) 16 kg D) a) 2.3 kg 13 / 16 13) 1. ASTM D 1557 the standard test method for the……..Compaction Characteristics of Soil Using………Effort A) d) None B) b) Field Compaction, Modified Effort C) a) Lab Compaction, Standard Effort D) c) Lab Compaction, Modified Effort 14 / 16 14) The Minimum Test Specimen (test fraction) mass for Method C A) d)29 kg B) c) 5.9 kg C) a) 2.3 kg D) b)16 kg 15 / 16 15) Standard Size of the Mold Used for the Method A and Method B are A) a) 6 inch and 5 inch B) b) 6 inch and 4 inch C) d) 4 inch only D) c) 6 inch only 16 / 16 16) In order to Apply ASTM D1557 and ASTM D 698, Material should…….percent mass should retain of……..Sieve A) d)None B) b) 30% and ¾ inch sieve C) c) 40% and ¾ inch sieve D) a) 25% and ½ inch sieve Loading Your Result Your score isThe average score is 0% 0% Restart quiz